Watcher XL Plus - Camera Recording
The first step to setting up motion recording is to make sure the software is setup for it. To enter the Record Schedule Setting, click on System Settings (). IP Camera Settings For Motion Detection Click on Record Schedule Setting on the left. Here ...
Watcher TVI – Playback Guide
Playback Playback the record files of a specific channel in the live view menu. Channel switch is supported. Instant Playback by channel Choose a Channel under live view. Click on in the shortcut operation menu. Note: Only files recorded during the ...
Watcher XL Plus – Initial Installation
Congratulations on your purchase of the Watcher XL PLUS Security System! Included with your system should be a sheet including information to access this website, along with your system password. If you lose or forget this password, please contact us ...
Watcher XL Plus - Network Configuration
To change the network or IP address configuration follow the steps below: Click on Settings (Settings_Icon) at the bottom of the screen. Click on Network Settings from the menu on the left. Network Configuration for Adapter 1 Configure adapter 1 ...
Watcher XL Plus - Adding a New Camera
Once the camera is connected you should see lights on the port of the PoE Switch. When lights are lit, the switch is receiving communication. The camera will take a few moments to power on before it can be added. Once it is powered on, follow these ...